C.B.C.

Rotary pipe cutter and UNI63 three phase pipe bender

ROTARY PIPE CUTTER
The rotary pipe cutter is a powerful and accurate machine to perform a perpendicular and burr-free cut on stainless steel, carbon steel, non-ferrous metal, cast iron, and plastic pipes in a few seconds. The capacity is 3/8”-4”gas and thickness 1-6mm. The body contains a 1700W/230V/50Hz variable speed motor. The blade diameter is 80mm and the weight is 65kg.
The supplied flasks allow the workbench or tripod stand fixing for an optimal cut. It is detachable into two parts to be carried easily to building sites or around workshops. This 100% made in Italy product enables an easy and fast diameter change clamping adjustment, the quick cutting size adjustment, and the automatic increase of the cutting depth. It has an anti-deformation self-centering vice and a rotating and folding handle and is low-maintenance. It is the ideal machine for the hydraulic, heating and plumbing, ship-building, oil-hydraulic, industrial, and plant engineering sectors.

UNI63 THREE PHASE PIPE BENDER
Three phase, digital, semiautomatic, electromechanical, 2 speed, and 400V/50HZ UNI63 pipe bender for small and medium sized pipes to be bent from 0° to 180°. The standard supply includes a 32mm sized square shaft for 3D and 4D formers, a foot switch, and a quick guide positioner. The control unit is touchscreen, multilanguage, and allows to set and to control the bending angle and to store 50 programs for 9 sequential angles. For small sized pipes it performs radii under 30mm by an interchangeable former holding small sized shaft and by a guide support adapter. Both are to be requested as accessories. It can be equipped with a moving plane of bend for serial bends or with a mandrel kit to achieve tight radii on thin pipes. It is the ideal machine for the hydraulic, heating and plumbing, ship-building, oil-hydraulic, industrial, and plant engineering sectors. Sizes: 74x45x100cm. Weight: 150kg.